View TLCPG510_8935366.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 1 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultrabright led, ? 5 mm untinted non-diffused package description the tlc.51.. series is a clear, non-diffused 5 mm led for high end applications where supreme luminous intensity required. these lamps with clear untinted plastic case utilize the highly developed ultrabright alingap (as). the lens and the viewing angle is optimized to achieve best performance of light ou tput and visibility. product group and package data ? product group: led ?package: 5 mm ? product series: power ? angle of half intensity: 9 features ? untinted non-diffused lens ? utilizing ultrabright allngap (as) ? high luminous intensity ? high operating temperature: t j (chip junction temperature) up to 125 c for allngap devices ? luminous intensity and color categorized for each packing unit ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 applications ? interior and exterior lighting ? outdoor led panels ? instrumentation and front panel indicators ? central high mounted stop lights (chmsl) for motor vehicles ? replaces incandescent lamps ? traffic signals ? light guide design note (1) driving the led in reverse direction is suitable for a short term application 19223 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. tlcs5100 super red 2400 7500 - 50 626 630 638 50 - 2.1 2.7 50 allngap on gaas tlcr5100 red 4300 11 000 - 50 611 616 622 50 - 2.1 2.7 50 allngap on gaas tlco5100 soft orange 4300 12 000 - 50 600 605 611 50 - 2.1 2.7 50 allngap on gaas tlcy5100 yellow 3200 7500 - 50 585 590 597 50 - 2.1 2.7 50 allngap on gaas tlcy5100-asz yellow 3200 7500 - 50 585 590 597 50 - 2.1 2.7 50 allngap on gaas tlcyg5100 yellow green 1350 3500 - 50 565 572 576 50 - 2.2 2.7 50 allngap on gaas TLCPG5100 pure green 430 1250 - 50 555 562 567 50 - 2.1 2.7 50 allngap on gaas absolute maximum ratings (t amb = 25 c, unless otherwise specified) tlcs510., tlcr510., tlco510., tlcy510., tlcyg510., TLCPG510. parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current t amb 85 c i f 50 ma surge forward current t p 10 s i fsm 1a power dissi pation p v 135 mw junction temperature t j 125 c operating temperature range t amb -40 to +100 c storage temperature range t stg -40 to +100 c soldering temperature t 5 s, 2 mm from body t sd 260 c thermal resistance junction/ambient r thja 300 k/w
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 2 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. 2.0 note (1) in one packing unit i vmax. /i vmin. 2.0 note (1) in one packing unit i vmax. /i vmin. 2.0 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlcs5100, super red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma tlcs5100 i v 2400 7500 - mcd dominant wavelength i f = 50 ma d 626 630 638 nm peak wavelength i f = 50 ma p - 641 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -20-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf --2-mv/k temperature coefficient of d i f = 50 ma tc d -0.04-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlcr5100, red parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma tlcr5100 i v 4300 11 000 - mcd dominant wavelength i f = 50 ma d 611 616 622 nm peak wavelength i f = 50 ma p - 622 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -18-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf --3.5-mv/k temperature coefficient of d i f = 50 ma tc d -0.05-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlco5100, soft orange parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma tlco5100 i v 4300 12 000 - mcd dominant wavelength i f = 50 ma d 600 605 611 nm peak wavelength i f = 50 ma p - 611 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -17-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf --2.5-mv/k temperature coefficient of d i f = 50 ma tc d -0.1-nm/k
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 3 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) in one packing unit i vmax. /i vmin. 2.0 note (1) in one packing unit i vmax. /i vmin. 2.0 note (1) in one packing unit i vmax. /i vmin. 2.0 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlcy5100, yellow parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma tlcy5100 i v 3200 7500 - mcd dominant wavelength i f = 50 ma d 585 590 597 nm peak wavelength i f = 50 ma p - 593 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -17-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf --3.5-mv/k temperature coefficient of d i f = 50 ma tc d -0.1-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) tlcyg5100, yellow green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma tlcyg5100 i v 1350 3500 - mcd dominant wavelength i f = 50 ma d 565 572 576 nm peak wavelength i f = 50 ma p - 574 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -15-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.22.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf --4.5-mv/k temperature coefficient of d i f = 50 ma tc d -0.1-nm/k optical and electrical characteristics (t amb = 25 c, unless otherwise specified) TLCPG5100, pure green parameter test condition part symbol min. typ. max. unit luminous intensity (1) i f = 50 ma TLCPG5100 i v 430 1250 - mcd dominant wavelength i f = 50 ma d 555 562 567 nm peak wavelength i f = 50 ma p - 563 - nm spectral bandwidth at 50 % i rel max. i f = 50 ma ? -20-nm angle of half intensity i f = 50 ma ? - 9-deg forward voltage i f = 50 ma v f -2.12.7v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 50 ma tc vf --3.5-mv/k temperature coefficient of d i f = 50 ma tc d -0.1-nm/k
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 4 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. the above type numbers represent the order groups which include only a few brightness groups. only one group will be shipped on each bag (there will be no mixing of two groups on each bag). in order to ensure availabi lity, single brightness grou ps will not be orderable. in a similar manner for colors where wavelength groups are measured and binned, single wa velength groups will be shipped in any one bag. in order to ensure availabi lity, single wavelength grou ps will not be orderable. note ? wavelengths are tested at a current pulse duration of 25 ms and an accuracy of 1 nm. luminous intensity classification group luminous intensity (mcd) standard min. max. bb 430 860 cc 575 1150 dd 750 1500 ee 1000 2000 ff 1350 2700 gg 1800 3600 hh 2400 4800 ii 3200 6400 kk 4300 8600 ll 5750 11 500 mm 7500 15 000 nn 10 000 20 000 pp 13 500 27 000 qq 18 000 36 000 rr 24 000 48 000 ss 32 000 64 000 tt 43 000 86 000 uu 57 500 115 000 color classification group dom. wavelength (nm) red soft orange yellow yellow green pure green min. max. min. max. min. max. min. max. min. max. 0 - - - - 585 588 - - 555 559 1 611 618 - - 587 591 - - 558 561 2 614 622 600 603 589 594 - - 560 563 3 - - 602 605 592 597 - - 562 565 4 - - 604 607 - - - - 564 567 5 - - 606 609 - - 565 570 - - 6 - - 608 611 - - 567 572 - - 7 - - - - - - 569 574 - - 8 - - - - - - 571 576 - -
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 5 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative intensity vs. wavelength fig. 3 - relative radiant sensitivity vs. angular displacement fig. 4 - forward current vs. forward voltage fig. 5 - forward current vs. forward voltage fig. 6 - relative luminous flux vs. forward current 0 10 20 30 40 50 60 0 20 40 60 80 100 120 t amb - ambient temperature (c) 16710_1 i f - forward current (ma) pure green yellow green yellow soft orange red super red 0.0 0.2 0.4 0.6 0.8 1.0 1.2 600 620 640 660 680 700 17045_1 i v rel - relative luminous intensity super red - wavelength (nm) 0.4 0.2 0 s rel - relative sensitivity 94 8351 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 ? - angular displacement 0 20 40 60 80 100 1.5 1.7 1.9 2.1 2.3 2.5 v f - forward voltage (v) 15974_1 i f - forward current (ma) super red red soft orange yellow 0 20 40 60 80 100 1.6 1.8 2.0 2.2 2.4 2.6 v f - forward voltage (v) 18644 yellow green pure green i f - forward current (ma) 0.01 0 1 10 1 10 100 i f - forward current (ma) 17042 i v rel - relative luminous intensity super red
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 6 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - change of dominant wavelength vs. ambient temperature fig. 8 - relative luminous inte nsity vs. ambient temperature fig. 9 - change of forward voltage vs. ambient temperature fig. 10 - relative in tensity vs. wavelength fig. 11 - relative luminous flux vs. forward current fig. 12 - changes of dominant wavelength vs. forward current -1.5 -1.0 -0.5 0.0 0.5 1.0 1.5 10 20 30 40 50 60 70 80 90 100 17043-1 i f - forward current (ma) super red - change of dom. wavelength (nm) ? d 0.0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17040_1 i v rel - relative luminous intensity super red - 200 - 150 - 100 - 50 0 50 100 150 200 250 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) v f - change of forward voltage (mv) 10 ma 30 ma 50 ma 17039_1 super red 0.0 0.2 0.4 0.6 0.8 1.0 1.2 570 590 610 630 650 670 - wavelength (nm) 16007 i rel. - relative luminous intensity red 0.01 0.1 1 10 110100 i f - forward current (ma) 17037 i v rel - relative luminous intensity red - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 1.5 10 20 30 40 50 60 70 80 90 100 17038 - change of dom. wavelength (nm) d i f - forward current (ma) red
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 7 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 13 - relative luminous inte nsity vs. ambient temperature fig. 14 - change of forward voltage vs. ambient temperature fig. 15 - change of do minant wave length vs. ambient temperature fig. 16 - relative in tensity vs. wavelength fig. 17 - relative luminous flux vs. forward current fig. 18 - change of dominant wavelength vs. forward current 0.0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17035 i v rel - relative luminous intensity red - 200 - 150 - 100 - 50 0 50 100 150 200 250 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17034 v f - change of forward voltage (mv) 10 ma 30 ma 50 ma red - 6 - 4 - 2 0 2 4 6 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17036 ? d - change of dom. wavelength (nm) red 0.0 0.2 0.4 0.6 0.8 1.0 1.2 560 580 600 620 640 660 16314 soft orange i v rel - relative luminous intensity - wavelength (nm) 0.01 0.1 1 10 110100 i f - forward current (ma) 17023 i v rel - relative luminous intensity soft orange - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 1.5 10 20 30 40 50 60 70 80 90 100 17024 - c hange of dom. wavelength (nm) d i f - forward current (ma) soft orange
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 8 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 19 - relative luminous inte nsity vs. ambient temperature fig. 20 - change of forward voltage vs. ambient temperature fig. 21 - change of do minant wave length vs. ambient temperature fig. 22 - relative in tensity vs. wavelength fig. 23 - relative luminous flux vs. forward current fig. 24 - change of dominant wavelength vs. forward current 0.0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17021 i v rel - relative luminous intensity soft orange - 200 - 150 - 100 - 50 0 50 100 150 200 250 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17020 v - change of forward voltage (mv) f 10 ma 30 ma 50 ma soft orange - 6 - 4 - 2 0 2 4 6 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17022 - change of dom. wavelength (nm) d soft orange 0 0.2 0.4 0.6 0.8 1.0 1.2 540 560 580 600 620 640 - wavelength (nm) 16008 i v rel. - relative luminous intensity yellow 0.01 0.1 1 10 1 10 100 i f - forward current (ma) 17018 i v rel - relative luminous intensity yellow - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 1.5 10 20 30 40 50 60 70 80 90 100 17019 - change of dom. wavelength (nm) d i f - forward current (ma) yellow
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 9 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 25 - relative luminous inte nsity vs. ambient temperature fig. 26 - change of do minant wave length vs. ambient temperature fig. 27 - change of forward voltage vs. ambient temperature fig. 28 - relative in tensity vs. wavelength fig. 29 - relative luminous flux vs. forward current fig. 30 - change of dominant wavelength vs. forward current 0.0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17016 i v rel - relative luminous intensity yellow - 6 - 4 - 2 0 2 4 6 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17017 ? d - change of dom. wavelength (nm) yellow - 200 - 150 - 100 - 50 0 50 100 150 200 250 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 17015 v f - change of forward voltage (mv) 10 ma 30 ma 50 ma yellow 0.0 0.2 0.4 0.6 0.8 1.0 1.2 520 540 560 580 600 620 18647 yellow green i v rel - relative luminous intensity - wavelength (nm) 0.01 0.1 1 10 110100 i f - forward current (ma) 18646 i v rel - relative luminous intensity yellow green - 3 - 2 - 1 0 1 2 3 10 20 30 40 50 60 70 80 90 100 18649 ? d- change of dom. wavelength (nm) i f - forward current (ma) yellow green
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 10 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 31 - relative luminous inte nsity vs. ambient temperature fig. 32 - change of do minant wave length vs. ambient temperature fig. 33 - change of forward voltage vs. ambient temperature fig. 34 - relative in tensity vs. wavelength fig. 35 - relative luminous flux vs. forward current fig. 36 - change of dominant wavelength vs. forward current 0 0.5 1.0 1.5 2.0 2.5 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18619 i v rel - relative luminous intensity yellow green - 8 - 6 - 4 - 2 0 2 4 6 8 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18620 - change of dom. wavelength (nm) ? d yellow green - 300 - 200 - 100 0 100 200 300 400 500 600 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18618_1 v - change of forward voltage (mv) f 10 ma 30 ma 50 ma yellow green 0.0 0.2 0.4 0.6 0.8 1.0 1.2 510 530 550 570 590 610 18648 pure green i v rel - relative luminous intensity - wavelength (nm) 0.01 0.1 1 10 110100 i f - forward current (ma) 18645 i v rel - relative luminous intensity pure green - 3 - 2 - 1 0 1 2 3 10 20 30 40 50 60 70 80 90 100 18650 - change of dom. wavelength (nm) d i f - forward current (ma) pure green
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 11 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 37 - relative luminous inte nsity vs. ambient temperature fig. 38 - change of do minant wave length vs. ambient temperature fig. 39 - change of forward voltage vs. ambient temperature 0.0 0.5 1.0 1.5 2.0 2.5 3.0 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18616 i v rel - relative luminous intensity pure green - 8 - 6 - 4 - 2 0 2 4 6 8 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18617 ? d - change of dom. wavelength (nm) pure green - 300 - 200 - 100 0 100 200 300 400 500 600 - 50 - 25 0 25 50 75 100 t amb - ambient temperature (c) 18615 v f - change of forward voltage (mv) 10 ma 30 ma 50 ma pure green
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 12 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters tape fig. 40 - led in tape ammopack fig. 41 - tape direction note ? the new nomenclature for ammopack is e.g. asz only, without suffix for the led orientation. th e carton box has to be turned to the desired position: + for anode first, or - for cathode first. as12z and as21z are still valid for already existing types, but not for new design. 96 12121 2.54 nom. 35.9 0.55 ? 5.8 0.15 12.9 0.3 7.7 0.15 8.7 0.3 0.5 + 0.15 - 0.05 1 min. 1.1 0.25 (5.1) < 0.7 a c r 2.49 (sphere) area not plane ? 5 0.15 0.5 + 0.15 - 0.05 specifications according to din technical drawings drawing-no.: 6.544-5258.04-4 issue: 9; 23.07.10 paper adhesive tape identification label reel tape diodes: anode before cathode phototransistors: emitter before collector code 21 diodes: cathode before anode phototransistors: collector before emitter code 12 94 8671 tape feed c b a 94 8667-1 label
tlcs510., tlcr510., tlco510., tl cy510., tlcyg510., TLCPG510. www.vishay.com vishay semiconductors rev. 1.8, 03-feb-16 13 document number: 81346 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 tape dimensions in millimeters option dim. h 0.5 mm as 17.3 94 8172 quantity per: 1000 reel (mat.-no. 1764) 0.9 max. ? 4 0.2 6.35 0.7 12.7 0.2 5.08 0.7 12.7 1 2 1 0.3 0.2 12 0.3 9 0.5 2.54 + 0.6 - 0.1 measure limit over 20 index-holes: 1 18 + 1 - 0.5
legal disclaimer notice www.vishay.com vishay revision: 13-jun-16 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.

▲Up To Search▲

Price & Availability of TLCPG510

	To Download TLCPG510 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .